Recommendations before installation
Before connecting, please make sure of the following:1. Your router operates at a frequency of 2.4 GHz (routers operating at a frequency of 5 GHz are not supported). You can check this information with the manufacturer of the router.

Note. If the router supports two frequencies, use a 2.4 GHz network when connecting.
2. The security method of your WiFi network must be installed with the latest version - WPA / WPA2 (if you have WEP method, we strongly recommend changing it for your own safety).

3. For the first connection, place the camera as close to the router as possible (1-6ft).

Connect iPhone to WiFi camera Morvelli FHD22
Step 1: Smart Life Application & Account Registration
1. Connect iPhone to your Wi-Fi network (with the Internet).

2. Download and install the Smart Life app in the App Store.

3. Go to the Smart Life app and register a new account.

4. A verification code will be sent to your e-mail (which you indicated in the previous step). To confirm the registration, enter the code in the registration field.


5. Finish registering. Enter the account name, number of rooms and other information as desired.
Step 2: Turning on and preparing the camera
1. Connect power to the camera. Wait for the camera to load (approximately 1 minute).

2. There is a "Reset" button at the back of the camera. Hold this button for about 7-8 seconds. You will hear a characteristic sound.

After a successful reset, you will hear a distinctive sound.
Your camera is ready to connect.
Step 3: Connecting the camera to your Smart Life account.
1.Go to the Smart Life app. Click "Add Device".
2. First select the "Security & Sensors" category. Then select "Camera" from the list.
3. A page with resetting the camera will open. We have completed this point in the previous step. Click "next step".
4. In this step, your WiFi network to which we connected earlier will be displayed. Enter the password for this network and click "Confirm".
5. The full screen of your iPhone will display a QR code. You need to scan this QR code with the Morvelli FHD22 camera. Place your iPhone opposite the camera lens at a distance of 3-7 inches.
6. After successfully scanning the QR code, the camera will emit a distinctive sound.
7. Click "I heard a Promt". The camera will start to connect, and when the process reaches 100%, the connected camera will be displayed on the screen.
Done. Your camera is connected to your Smart Life account!